WO-0011 · EA-04 · Single Batch Energetic Analysis

Roast #0118

450cfef306804b6893a802fbb26fe1eb

R-TSNKaleido M1S Dual SystemPosition: 12026-09-18T09:43:23+07:00

Canonical Roast IDb42d3b9f-0123-5b8d-bc93-3e753c9515e7

Domain00:00.0 → 07:55.5

Artisan native points318

REP native points480

Scientific payload digest65a499b68854c4ad0611294ca1dd05bf188bba9d149cfb6f73c53dc2bd020cf0

BeanR-TSN9bc78f64-223c-5d24-8df2-81d5a20ec13c

MachineKaleido M1S Dual System5f30394c-8134-5029-8492-efe6a34717c7

Roast batch position1canonical session position

Roast date/time2026-09-18T09:43:23+07:00source offset 420 min

Green weight125.0 gVALID

Roasted weight104.0 gVALID

One roast · one canonical elapsed-time axis

Energy Control Strategy → Thermal Response → RoR Response → Phase Result

Stored accepted evidence

Shared timing, explicit units: BT/ET, both independent RoR series, and recorded Burner/Hot Air/Drum commands retain native timestamps on one coordinated elapsed-time axis. Control traces remain stepwise; null or unavailable evidence remains a gap. Click legend items to isolate trace groups.

Landmark Reference Selector

This selection applies only to exploratory values on this Roast View. Accepted science and comparisons remain canonical.

Landmark Reference Selector

Evaluate a custom Landmark candidate

Enter Peak, DE, FC and Drop RoR in °C/min. This read-only calculation uses the accepted REP V1.1 engine and this roast's observed landmark times.

Independent REP Analysis RoR

Independent evidence · actual REP Analysis RoR and observed event times. Qualitative reference for Strategy Control design.

Q+: actual REP Analysis RoR above the selected reference. Q−: actual REP Analysis RoR below the selected reference. Shading is limited to Peak → Drop; numerical metrics come from Server_app.

Strategy Control

Executed command trace — Burner / Hot Air / Drum. Native order and exact canonical time are retained. Open diamonds mark zero-dwell intermediate commands; observed sampled states are an optional legend overlay. Hover shows cycle, native ordinal, exact timestamps and corroboration status. Sampled controls are not independent physical actuator feedback.

Strategy Control: SC-0007 SC-0007 — SC-0007 · Matched canonical control program Control-program artifact: REP_SC-0007_B1_DE-High_FC-Stable_D205_150g.alrm Artifact nominal mass: 150.000000 g Intended Charge treatment: Unknown / unavailable Actual Charge BT: 165.1 °C Charge treatment and actual batch weight are independent of Strategy Control identity. Program attribution does not prove that a particular Alarm Set file was historically loaded.

Independent stored-evidence panels and dual-RoR inspection

Combined thermal view: stored BT and ET observations share the canonical CHARGE→DROP domain. Source sentinels remain gaps.

P0 remains in the scientific series. Its Charge→TP transient may extend beyond the Analysis View scale; use Full Range / P0 View to inspect it completely.

Independent evidence: the panels share elapsed-time navigation and the exact same y-axis range, while retaining separate native timestamps. Display labels are rounded for research reading; the API and scientific payload retain full precision.

Accepted PostgreSQL phase path

P0–P3 phase metrics

P0–P3 governed metrics available

Phase	Boundary / interval	Duration	ΔBT	Qphase	Qstability	Stored diagnostics
P0 RESOLVED	CHARGE → TP 00:00.0 → 00:36.0	00:36.0	-61.3 °C	—	—	V1.1 · REFERENCE_ONLY Legacy / auxiliary metrics Qphase 1629.5251 °C·s · `ETBT_GAP_INT_V1` Qstability 0.8438 ratio · `ROR_DETREND_RMSE_V1` Inspect 8 values BT start 165.1 °C BT end 103.8 °C Mean BT rate -102.1667 °C/min Qphase density 45.2646 °C Mean \|RoR\| 108.2838 °C/min RoR trend slope 7.6512 °C/min/s Residual RMSE 20.049 °C/min Instability ratio 0.1852 ratio
P1 RESOLVED	TP → DE 00:36.0 → 03:45.0	03:09.0	53.2 °C	53.1761 °C	⟨1.6751 °C, 4.1553 °C/min⟩	V1.1 Qphase: TP → DE Qstability: PEAK → DE V1.1 Qstability components Q+ · excess 2.7188 °C Q− · deficit 1.0437 °C Qbalance +1.6751 °C Amax 4.1553 °C/min Legacy / auxiliary metrics Qphase 11053.8749 °C·s · `ETBT_GAP_INT_V1` Qstability 0.8179 ratio · `ROR_DETREND_RMSE_V1` Inspect 8 values BT start 103.8 °C BT end 157 °C Mean BT rate 16.8889 °C/min Qphase density 58.4861 °C Mean \|RoR\| 16.9356 °C/min RoR trend slope 0.0233 °C/min/s Residual RMSE 3.7699 °C/min Instability ratio 0.2226 ratio
P2 RESOLVED	DE → FC 03:45.0 → 05:01.5	01:16.5	16.8 °C	17.087 °C	⟨1.7870 °C, 5.5939 °C/min⟩	V1.1 Qphase: DE → FC Qstability: DE → FC V1.1 Qstability components Q+ · excess 2.0845 °C Q− · deficit 0.2975 °C Qbalance +1.7870 °C Amax 5.5939 °C/min Legacy / auxiliary metrics Qphase 2375.7001 °C·s · `ETBT_GAP_INT_V1` Qstability 0.902 ratio · `ROR_DETREND_RMSE_V1` Inspect 8 values BT start 157 °C BT end 173.8 °C Mean BT rate 13.1765 °C/min Qphase density 31.0549 °C Mean \|RoR\| 13.4123 °C/min RoR trend slope -0.1055 °C/min/s Residual RMSE 1.4576 °C/min Instability ratio 0.1087 ratio
P3 RESOLVED	FC → DROP 05:01.5 → 07:55.5	02:54.0	31.5 °C	30.7003 °C	⟨8.9503 °C, 8.7982 °C/min⟩	V1.1 Qphase: FC → DROP Qstability: FC → DROP V1.1 Qstability components Q+ · excess 9.1558 °C Q− · deficit 0.2055 °C Qbalance +8.9503 °C Amax 8.7982 °C/min Legacy / auxiliary metrics Qphase 581.175 °C·s · `ETBT_GAP_INT_V1` Qstability 0.832 ratio · `ROR_DETREND_RMSE_V1` Inspect 8 values BT start 173.8 °C BT end 205.3 °C Mean BT rate 10.8621 °C/min Qphase density 3.3401 °C Mean \|RoR\| 10.6131 °C/min RoR trend slope -0.0148 °C/min/s Residual RMSE 2.143 °C/min Instability ratio 0.2019 ratio

Canonical accepted · LANDMARK_REFERENCE_V1_1 · REP V1.1. Peak 20.0, DE 14.0, FC 10.0, Drop 5.0 °C/min. Reference points follow this roast’s observed landmark times; these are RoR values, not time targets. Qphase: ROR_PHASE_INT_V1_1 (°C). Qstability: ⟨Qbalance (°C), Amax (°C/min)⟩, ROR_TARGET_DEVIATION_V1_1. P0 and pre-Peak behavior are reference only. Analysis RoR configuration: cc4eaa83362467d1b81813d3e3476d38f913855e3608d559a674359ca8fff4d3.

Positive Qbalance means net excess; negative means net deficit. A balance near zero describes the integral only and can coexist with large excursions. Amax is the largest instantaneous absolute RoR deviation from Target RoR V1.1.

Artisan RoR characteristics

Type	Elapsed	RoR °C/min	Phase	Status / acquisition
NEGATIVE_PEAK	Unknown	Unknown	—	UNKNOWN
PEAK	01:18.0	20.40 °C/min	P1	VALIDACTUAL_OBSERVATION
DE	03:45.0	15.20 °C/min	—	VALIDEXACT_SAMPLE
FC	05:01.5	10.80 °C/min	—	VALIDEXACT_SAMPLE
MIN_AFTER_PEAK	07:04.5	6.00 °C/min	P3	VALIDACTUAL_OBSERVATION
DROP	07:55.5	7.60 °C/min	—	VALIDEXACT_SAMPLE

REP Analysis RoR characteristics

Type	Elapsed	RoR °C/min	Phase	Status / acquisition
NEGATIVE_PEAK	00:02.0	-247.35 °C/min	P0	VALIDACTUAL_OBSERVATION
PEAK	01:27.0	21.24 °C/min	P1	VALIDACTUAL_OBSERVATION
DE	03:45.0	17.31 °C/min	—	VALIDEXACT_STORED_ANALYTICAL_POINT
FC	05:01.5	12.28 °C/min	—	VALIDEXACT_STORED_ANALYTICAL_POINT
MIN_AFTER_PEAK	07:45.0	5.16 °C/min	P3	VALIDACTUAL_OBSERVATION
DROP	07:55.5	13.80 °C/min	—	VALIDEXACT_STORED_ANALYTICAL_POINT

Canonical boundaries and phase resolution

P0CHARGE → TP RESOLVED 00:00.0 → 00:36.0

P1TP → DE RESOLVED 00:36.0 → 03:45.0

P2DE → FC RESOLVED 03:45.0 → 05:01.5

P3FC → DROP RESOLVED 05:01.5 → 07:55.5

Scientific contract and provenance

Dataset WO0008_GATE4_DUAL_ROR_VIEWER_DATASET_V1 · digest 65a499b68854c4ad0611294ca1dd05bf188bba9d149cfb6f73c53dc2bd020cf0

Source bundle REP_ANALYSIS_INPUT_BUNDLE_V3 · digest cf58b955fcef60a4f09000fe1c860620195d6969e7cf9f313ed1b8539d0f8c37

REP method BT_LOCAL_LINEAR_REGRESSION_V1 · configuration cc4eaa83362467d1b81813d3e3476d38f913855e3608d559a674359ca8fff4d3

Artisan series 4341bc88-cf6f-5f15-8bf5-21498ceb615f · origin SOURCE_DERIVED · grid ALOG_MAIN_SAMPLE_INDEX_V1

REP series 27004d3c-a7fa-529f-8b99-8413db4d4962 · origin REP_DERIVED · grid 1-second base grid plus exact fractional resolved event coordinates

Sensory Evidence: —